Fully Automatic 100 PSI RO Booster Pump System
Designed for use with any R.O. System that includes a REVERSE OSMOSIS storage tank.
Need for this reverse osmosis booster pump will arise if the input water pressure to your Reverse Osmosis System is lower then 50 PSI, the PPM count of the water is very high (turbid Water) or if you have a combination of both. Reverse osmosis pumps give your system the PSI needed to overcome both these things.
Set it and forget it! This reverse osmosis booster pump is fully Automatic by way of its High Pressure Switch that turns the booster pump off once the tank is full.
Produce 100 GPD by Increasing water pressure between 70-100 PSI
Mounting Bracket with rubber absorbers
Whisper Quite Operation
1/4″ Quick connect Fittings
Everything needed for Installation Included
Please Note: An Aquasafe storage tank must be present for this pumps automation to function
This booster pump system Raises the water pressure (PSI)in your reverse osmosis system and maintains the pressure at ideal levels for the system to operate at maximum efficiency.
This RO pump will ensure consistent production of the high quality R.O. water you desire and the compact Design of this Booster Pump with its minimal connections allows for easy installation..
This booster pump for reverse osmosis is designed for use with Reverse Osmosis Water Purification Systems. Check the specifications carefully before applying this booster pump for other uses.
The following is included with a purchase of this Booster Pump
1 x 100 PSI RO (Reverse Osmosis) Booster Pump
1 x 24V Transformer (Mountable)
1 x High Pressure Switch
2 x Quick Connect Elbows Fittings (3/8″ – 1/4″ adaption)
1 x Pre assembled booster pump mounting bracket
1 x Extra Length of wire (If needed)
Booster Pump Specifications:
Nominal Flow Rate: 1.0 LPM
Max Pump Output: 110 PSI
Max Inlet Pressure: 60 PSI
Voltage: 24 VDC
Input: 120V AC 60Hz 38W
Output: 24V DC 1200mA